OPELIKA, AL. (January 10th, 2022) - Dinan is pleased to be able to announce a variety of new product offerings being added to the catalog; the Cold Air Intake, Engine Cover and High Flow Filters for the F97 X3M and F98 X4M. Experience the Dinan difference today and never look back!

Part Number(s): D760-0054 (CAI), D590-0001 (Engine Cover) & D403-0007 (High Flow Filters)

Application(s):

• 2020-2022 F97 X3M
• 2020-2022 F97 X3M Competition
• 2020-2022 F98 X4M
• 2020-2022 F98 X4M Competition

The Quick and Dirty (Features and Benefits) (Cold Air Intake):

• More Power: Max gains of 7 WHP and 8 lb-ft of torque @ 4750 RPM.
• More Flow: 18.6% greater than stock (Stock: 862 CFM, Dinan: 1022 CFM @ 28" H2O per bank).
• Massive detail rich, gloss UV coated, 2x2 carbon fiber engine cover for maximum under hood appeal.
• Set of drop-in multi-layered cotton high flow filters for increased flow and superior filtration.
• One word: Magnets. The mounting hardware solution for those that wish to be free of clutter.
• Bolt-on installation.

The Story (Cold Air Intake):

Consisting of drop in high flow filters and an enormous carbon fiber engine cover, the F97/F98 intake is a straightforward solution to delivering aesthetically enhanced improved air flow.

Despite its unorthodox appearance and seemingly haphazard design forced to fit in limited available space, the OEM intake system is incredibly efficient. Wholesale improvement upon the design given the packaging limitations meant that a full re-design was not going to be feasible at a price point that would be accepted so a simpler more direct approach was taken. Improve air flow in the factory system where it was restricted – the filters themselves. Simply going from the stock paper filters to the Dinan multi-layered cotton filters not only increased flow by nearly 20% but also resulted in some modest power gains in the mid and upper RPM range. While happy with the results, the engine bay remained lack luster and devoid of any visual hallmarks.

And so, the worship worthy ziggurat of carbon fiber was born. The herculean, detail laden, UV coated 2x2 carbon fiber lid inhabits the same footprint as its factory counterpart but flairs outward at its sides in order to inhibit the view of some of the unsightly stainless-steel hardware underneath that is visible in stock form. With the goal of having the engine bay as clutter free as possible the engine cover itself is also devoid of distracting mounting hardware. Instead, powerful rare earth magnets are utilized resulting in not only an incredibly clean installation, but also one that takes no time or effort to mount.

Together, the high flow filters and the carbon fiber engine cover, represent the X3M/X4M intake system even if the “intake” moniker may be considered a stretch and not universally accepted. The combination still represents the best comprehensive value for the 2 pieces. However, each component is sold separately for those that may only be after the increased flow/power or only the visual appeal. There is an option for everyone.

The Quick and Dirty (Features and Benefits) (Engine Cover):

• Generous amount of gloss UV coated 2x2 carbon fiber encompassing a huge swath of the engine bay for maximum under hood appeal.
• Oversized to hide unsightly stainless-steel hardware, cables, tubes and the like for a cleaner then factory appearance.
• One word: Magnets. The mounting solution for those that wish to be free of clutter.
• Bolt-on installation.

The Story (Engine Cover):

Adding some aesthetic charm to an otherwise humble X3M/X4M engine bay, the Dinan carbon fiber engine cover is a bold statement for anyone wanting to give the under-hood visuals an upgrade.

The massive, detail laden, UV coated 2x2 carbon fiber lid inhabits the same footprint as its factory counterpart but flairs outward at its sides in order to inhibit the view of some of the unsightly stainless-steel hardware underneath that is visible in stock form. With the goal of having the engine bay as clutter free as possible the engine cover itself is also devoid of distracting mounting hardware. Instead, powerful rare earth magnets are utilized resulting in not only an incredibly clean installation, but also one that takes no time or effort to mount. As a bonus, already straightforward filter changes are made even easier and expeditiously.

The Quick and Dirty (Features and Benefits) (High Flow Filters):

• More Power: Max gains of 7 WHP and 8 lb-ft of torque @ 4750 RPM.
• More Flow: 18.6% greater than stock (Stock: 862 CFM, Dinan: 1022 CFM @ 28" H2O per bank).
• Designed to fit both the factory air box as well as the Dinan intake system (D760-0054).
• Deep pleats in multi-layered cotton for increased flow and superior filtration.
• Steel wire mesh providing strength and dent resistance.
• Full set of 4 individual filters.

The Story (High Flow Filters):

Let your engine breathe easier with an effortless air filter upgrade from Dinan. With superior flow and filtration in comparison to the OEM paper filters you can achieve performance gains for doing virtually nothing at a cost that is friendly to any pocketbook. Directly compatible with the Dinan High Flow Carbon Fiber Intake (D760-0054) or the factory F97 X3M / F98 X4M airbox, this set of drop-in high flow air filters is a one stop shop to unlocking maximum flow for the platform.